 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EGP20A THRU EGP20K 2.0 AMPS. Glass Passivated High Efficient Plastic Rectifiers Voltage Range 50 to 800 Volts Current 2.0 Amperes Features Plastic material used carries Underwriters Laboratory Classification 94V-0 Glass passivated cavity-free junction Superfast recovery time for high efficiency Low forward voltage, high current capability Low leakage current High surge current capability High temperature metallurgically bonded construction High temperature soldering guaranteed: 300/10 seconds, .375"(9.5mm) lead length at 5 lbs., (2.3kg) tension DO-15 Mechanical Data Cases: JEDEC DO-15 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.015 ounce, 0.4 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length @ TA = 55 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 2.0A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 Maximum Reverse Recovery Time ( Note 1 ) Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range Symbol EGP 20A EGP 20B EGP 20D EGP 20F EGP 20G EGP 20J EGP 20K Units V V V A A VRRM VRMS VDC I(AV) IFSM VF IR Trr Cj RJA RJL 50 35 50 100 70 100 200 140 200 300 210 300 2.0 75.0 400 280 400 600 420 600 800 560 800 0.95 1.25 5.0 100 50 35 60 20 -65 to + 150 1.7 75 40 V uA uA nS pF /W TJ ,TSTG Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0 MHz and Applied VR=4.0 Volts 3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B. - 588 - RATINGS AND CHARACTERISTIC CURVES (EGP20A THRU EGP20K) FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm AVERAGE FORWARD CURRENT. (A) 3.0 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH FIG.5- TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT. ( A) 2.0 10 Tj=150 0C 1.0 1 Tj=125 0C 0 0 25 50 75 100 o 125 150 175 0.1 Tj=75 0C AMBIENT TEMPERATURE. ( C) PEAK FORWARD SURGE CURRENT. (A) 90 75 60 45 30 15 FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 0.01 Tj=25 0C 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.6- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 PULSE WIDTH-300 S 1% DUTY CYCLE 0 1 INSTANTANEOUS FORWARD CURRENT. (A) 10 NUMBER OF CYCLES AT 60Hz 100 10 Tj=150 0C FIG.4- TYPICAL JUNCTION CAPACITANCE 140 1 Tj=25 0C JUNCTION CAPACITANCE.(pF) 120 100 80 60 40 20 0 0.1 Tj=25 0C f=1.0MHz Vsig=50mVp-p 0.1 EGP20A-EGP20D EGP20F EGP20K EGP20A-EGP20D EGP20F-EGP20K 1 10 REVERSE VOLTAGE. (V) 0.01 100 1000 0.2 0.4 0.6 0.8 1.0 1.2 1.4 FORWARD VOLTAGE. (V) 1.6 1.8 - 589 - |
Price & Availability of EGP20D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |